HIRE TILE REMOVER WOLFF DURO 200MM ELECTRIC
The DURO-STRIPPER removes bonded, flexible floor coverings in strips. It uses an oscillating system, i.e. the blade performs a circular movement. Before starting work, the flooring needs to be cut into strips of the blade’s width. To begin cut one strip crosswise. Then lift the flooring slightly in order to get the blade underneath it. We recommend cutting the first strip at right angles to the main working direction. By so doing access to the next strips is made easier. Cut the strips smaller if the floor covering is bonded very securely, e.g. with an epoxy adhesive. The blades are sharpened by the floor pavement. Therefore the blade has to be changed only if it is twisted or becomes worn. Blade Width 200mm (8ins) Strokes Per Minute 8500 Vibration Reading ms2 16 Decibel reading dB(A) 101 RATE OF WORK IS APPROX 15 SQ MTRS PER HOUR ON 2MM VINYL AND APPROX 30 SQ MTRS PER HOUR ON CARPETS/TILES.
Note: any prices or technical details given on these pages are subject to change without prior notice. All prices shown exclude VAT and are subject to availability.